Corcam DVRs are frequently used in security camera systems. However, sometimes users forget their passwords or their devices lock up due to incorrect attempts. In these cases, a Corcam DVR password reset is necessary. You can restore your device to usability by following the steps below.
📞 Fast Technical Support from WhatsApp
You can contact the CCTV Burada Technical Support Team immediately to quickly resolve your DVR/NVR issue.
🚀 Connect to Our WhatsApp Line1. Check the Default Password
The factory default information on newly purchased Corcam DVR devices is usually as follows:
-
Username: admin
-
Password: 123456 or blank
👉 If you cannot log in with these information, follow the reset methods below.
2. Reset Password with Security Question
Some Corcam models have a security question set during installation.
-
On the login screen, click on the “Forgot Password” option.
-
Answer the security question correctly.
-
Set your new password and save it.
3. Resetting with Master Code (Date Based)
Corcam DVR devices support resetting with master code based on system date.
-
Note the device date on the home screen.
-
Report this date to Corcam technical support.
-
Enter the master reset code given by the technical team on the device screen.
-
Create your new password.
4. Reset Password with Software
Some Corcam DVR models can be reset via computer connection.
-
Connect the DVR to your computer.
-
Run the software provided by the manufacturer or vendor.
-
Start the password reset process with the device's serial number or date information .
-
The software generates a new password and allows you to log in to your device.
5. Technical Service Support
If the above methods do not work:
-
You need to send your device to Corcam authorized technical service .
-
The service resets the device software and creates a new password.
Post-Password Reset Recommendations
✔ Be sure to keep your new password in a safe place.
✔ Avoid easy-to-guess passwords (e.g. 123456, admin).
✔ Prevent security vulnerabilities by keeping DVR software up to date.
✔ Share the password only to authorized persons.
Conclusion
This guide will walk you through the step-by-step process of resetting your Corcam DVR password . If your device is a different model or the methods above don't work, the best solution is to contact Corcam technical support .
